Fun Facts !!!

The world's smallest airplane is the Colomban Cri-Cri, a tiny twin-engine, amateur built.

Completion of the Project

This was the drone we do the EAGLE  II trainer for pilots turbo prop engine.

Project Process

• Research 
• Creation of the blog
• Construction of model aircraft

SOME  HISTORY ...

The dream of flight goes back to prehistory. Many legends and myths of the ancient stories of the Greek flights as the flight of Icarus. Leonardo da Vinci, among other inventors.

 The first flight by man by François de Rozier and the Marquis de Arlandes (in 1783) in an apparatus lighter than air, a paper balloon built by the Montgolfier brothers, full of hot air, the biggest challenge was to be building a machine heavier than air, can take flight on their own.

The Wright Brothers as the first to take off on board an airplane, December 17, 1903, off which lasted 12 seconds and which traveled about 36.5 meters.

Aviation has been a key issue in third world countries, for its realization have advanced much more than what has been achieved here in Colombia, some for other commercial war, and through the years have progressed in material structures that allow the aircraft has best choices of functionality and presentation.

PARTS OF THE PLANE    !!!

Aircraft with greater density than air, equipped with wings and a cargo space capable of flying, driven by one or more motors.

All airplanes are made of the following parts:

• fuselage
•  wings
•  tail 
• engine 
• Undercarriage

• Landing gear. It is the mechanism which sets the wheels of the plane

• wings, Form the structural part where the lift is created primarily to allow the plane fly.

• Fuselage. Must necessarily be streamlined so that there is less air resistance. This is the part which accommodates the crew, passengers and cargo.

Control surfacecontrol surfaces or control that are in the wings: the ailerons, flaps, spoilers and slats. They are all moving parts that cause different effects during the flight.

• Ailerons  : The ailerons are movable surfaces which are at the ends of the wings and on the trailing edge of these.

• horizontal stabilizers

Two surfaces are smaller than the wings, located almost always in horizontal position usually at the rear of the fuselage, and in different positions and shapes depending on the design, which ensures stability in the longitudinal direction, ie, ensure an angle constant attack if the pilot does not act on the controls.

 ¡¡¡ These are some terms and major parts of the plane, making the what is and allow its optimal functionality !!! 

                           ¡¡PROJECT !!

The theme of our project was to teach our colleagues what we love that are really planes, which took place for everyone to have a little more knowledge of this, and its functions, features, or some fun facts and some history, to open the plane a little more about this subject.

      ¡¡LEARNING!!

Classroom learning was not expected, given that only work in very little guidelines and was accompanied by the teacher, we can rescue the project was given a job which required time, things we did not know, and some were not yet so clear was what was achieved with satisfaction, the project that was chosen at will which made work more enjoyable and with more care.

 ¡¡WORK TO BE PRESENTED!!

The present work is a model aircraft, we seemed the best option so will be more appealing to our colleagues and we desemvolvernos in a better way in your exposion, was a work written by the members of the group the idea of ​​this is to show the basic characteristics of a plane, its functions, its parts and the drone would permit this work.